SoftScrolls
Menu

Turn your phone into the light

A torch when you need one, a light show when you don't - and it flashes to the music on its own.

Three ways to make light

Party Flashlight is a free Android torch app with three light sources, ten flash patterns and a live sound meter that fires the flash in time with the room. Works offline, no account, no permissions beyond the ones each mode needs.

  • Camera flash

    Rear LED

    The bright one. Full-strength LED for finding a keyhole, reading a fuse box, or walking a path with no streetlights.

  • Screen light

    The display

    The whole screen becomes the lamp, in whatever colour you pick. Softer than the LED, wider than the LED, and the only one that can be a colour.

  • Battery saver

    Low draw

    The same light at a fraction of the power, for when the torch has to last longer than the evening.

Live Flash

It flashes to the room, not to a timer

Most strobe apps blink on a fixed interval and drift out of time with whatever is playing within seconds. Party Flashlight listens instead. The dial reads the room in real time, you set the level the flash should fire at, and everything above that line triggers it.

  • A real reading, not a guess

    The meter shows what the microphone is actually hearing, so you can see the level before you set the trigger.

  • You pick the trigger point

    Set it low and the flash catches every note; set it high and it fires on the drop and nothing else.

  • Nothing is recorded

    The microphone drives the flash and that is all it does. No audio is stored, and nothing is sent anywhere.

Ten patterns, each with its own timing

Each has its own timing, from a clean build to a full scramble. Blink speed stretches or tightens all of them, and every one works on the LED or on the screen.

500 ms

The app goes faster than this page will. Drag far enough and the number keeps falling while the light here holds at a flash-safe speed - the quickest patterns reach that floor first.

Everything Party Flashlight does

Party Flashlight is a free Android torch app with three light sources, ten flash patterns and a live sound meter that fires the flash in time with the room. Works offline, no account, no permissions beyond the ones each mode needs.

Set the speed in milliseconds

One slider, one number. 500 ms is a comfortable club strobe; drag it down and it turns into a hard flicker, drag it up and it becomes a slow pulse you can sit in a room with.

Party Flashlight's blink speed screen: a vertical slider set to 500 ms

Pick the colour

Screen light runs in any colour you choose - warm white to read by, red to keep your night vision, or whatever matches the rest of the room.

It keeps working when the signal doesn't

There is nothing to load and nothing to sign into. The torch works on a plane, in a basement, in a power cut, and on a phone that has never been online - which is the whole point of a torch.

Get the app

A torch when you need one, a light show when you don't - and it flashes to the music on its own.

Frequently asked questions

Is Party Flashlight free?
Yes. Every light source and all ten patterns work without paying. The app is ad-supported and offers optional in-app purchases.
Does it work without an internet connection?
Yes. Everything runs on the device, so the torch, the patterns and the sound-reactive flash all work with no connection - which is the point of a torch app.
Why does a flashlight app need the microphone?
Only for Live Flash, the mode that flashes in time with the room. The app reads how loud it is to decide when to fire the flash. No audio is recorded, stored or sent anywhere, and if you never open Live Flash the permission is never requested.
Will the strobe drain my battery?
A hard strobe on the LED is the most power-hungry thing the app does. Battery saver mode runs the same light at a much lower draw, and the optional cooldown setting puts a rest between bursts.
What is the difference between the flash and the screen light?
The camera flash is the rear LED - bright, narrow and the one you want outdoors. The screen light turns the whole display into a soft, wide lamp, and it is the only one of the two that can be a colour.
Can I change how fast it blinks?
Yes. Blink speed is set in milliseconds on its own slider, from a fast flicker up to a slow pulse.
Is Party Flashlight available on iPhone?
Not yet. Party Flashlight is currently an Android app, available on Google Play.